Lab extruder knowledge Lab blown film extrusion line – Lab extruder by admin|Published April 28, 2019-Updated April 28, 2019 Lab Blown Film Extrusion Line Testing – Hartek Material: PE Temperature: 180 degrees
Published December 10, 2019 Make unremitting efforts to present the best products. Lab twin screw extrusion line adopts flat twin design. If the material is used together with filler, the problem of poor dispersion […]
Published June 30, 2021 New Type- 55ml Lab banbury mixer Model:HTK-55 Mixing Chamber Volume: 55ml Rotor Speed: 0~200rpm Rotor Speed Ratio: 2:3 Rotor Type: Roller , Banbury, Sigma, Max. Temp.: 350℃ Temp. […]
Published April 27, 2019 Lab Cast Film Extrusion Line Testing https://www.youtube.com/watch?v=9Wy2PZwCAPQ Lab Cast Film Extrusion Line Testing Material: PE
Published September 21, 2019 Laboratory pelletizing system is driven by Schneider motor The laboratory granulator is driven by Schneider motor with a power of 0.75 kW. The automatic compaction device of laboratory granulator is […]