Material is not used to water, try it with air cooling
You may also like
Preparatory work: 1. Prepare raw materials such as raw rubber, oil and small materials according to the needs of the product; 2. […]
Reasons for unstable current of main engine of plastic extruder ： (1) the feeding is not uniform. (2) the main motor bearing […]
Lab,lab single screw,extruder,Material melting Screw diameter: 20mm, 25mm, 30mm, 35mm LD/ Ratio： 28 Rotating Speed：120rpm Max.Temp. :350℃ Temp. Control Accuracy :±1.0℃ Pressure […]