Lab extruder knowledge Die of lab twin screw extrusion – Hartek by admin|Published May 10, 2019-Updated May 10, 2019 Die of lab twin screw extrusion – HartekDie:2-φ3.2mmEnough to meet the number of pull bars you need.From:http://www.extrusion-lab.com/Exhibition/show/26.html
Published June 3, 2019 Lab Blown Film Extrusion Line Lab Blown Film Extrusion Line1. Applicable for PE2. Working with lab single screw extruders with 20mm, 25mm or 30mm screw diameter4. Driven […]
Published March 19, 2020 Laboratory conveyor belt for twin screw extruder The material is not used to water, and cannot be cooled by water. Consider a fan-cooled conveyor belt. Conveyor belts are mainly […]
Published May 15, 2019 Flat extrusion die with 180mm width The clearance of die lip can be adjusted for the 180 mm width flat extrusion die. The coat hanger die can obtain […]
Published January 16, 2019 HTGD-20 Lab Twin Screw Extruder Delivery! Receiving unit: Guangdong Institute of Bioengineering Customer Feedback: They are very satisfied with the appearance and configuration of our equipment! Thank you […]