Lab extruder knowledge Die of lab twin screw extrusion – Hartek by admin|Published May 10, 2019-Updated May 10, 2019 Die of lab twin screw extrusion – HartekDie:2-φ3.2mmEnough to meet the number of pull bars you need.From:http://www.extrusion-lab.com/Exhibition/show/26.html
Published July 18, 2018 FDA medical device certification in the US FDA has a clear and strict definition of medical devices, which are defined as follows: “the so-called medical instruments are instruments, devices, […]
Published July 30, 2018 Lab blown film machine maintenance – targeted maintenance projects 1. Feeder system: Clean the filter in time to check whether the negative pressure feeding system has air leakage. 2. extruder system: […]
Published December 3, 2018 The composition & principle of lab blown film machine The lab blown film machine melts and melts plastic particles into a film. There are many kinds of film blowing machines, such […]
Published August 29, 2020 Lab Sheet Extrusion Line The main components of Lab Sheet Extrusion Line: The main machine of single screw extruder with screw diameter of 25 mm + […]