Lab,lab single screw,extruder,Material melting
Screw diameter: 20mm, 25mm, 30mm, 35mm
LD/ Ratio： 28
Rotating Speed：120rpm
Max.Temp. :350℃
Temp. Control Accuracy :±1.0℃
Pressure Measuring Range: 0~35MPa
Output: 0.5~3kg/h
Weight: 380kg
Dimension: 1120*690*1660mm
According to the feeding mode, it can be divided into cold feed extruder and hot feed extruder. Hot-fed rubber extruders are mostly […]
The proper shutdown procedures for small blown film machines. 1 Turn off the power switch of the corona processor first. 2 Turn […]
The sixth session of “plastic modification and extrusion granulation technology essentials” was originally scheduled to be held in Beijing Institute of chemical […]
The use of blown film machines and lab extruders: 1. Check that the temperature automatic control is intact, the heating apparatus is […]
