Feeding quantity control method of lab twin screw extruder
When using a lab twin-screw extruder, the current is too large, which can easily cause downtime. So it causes unnecessary waste.
One of the reasons is that the feed is too large.
The solution is:
Reduce the feeding amount of the feeder, or increase the screw speed of the small twin-screw extruder until the screw can be seen at the feeding port.
1 motor: Schneider servo motor, motor power 0.75 kW Poleless Speed Regulation 3 Cutter Maximum Speed: 400 RPM 4 guide roller 5 […]
Research and analysis of laboratory lab twin screw extruder From the whole, the research on the theory of twin-screw extruder is still […]
1. Before starting the machine, check the oil level of each lubrication part and find that it is not enough to add […]
Hartek Technologies Ltd. Sincerely service – our commitment, your confidence Perfect technical support and after-sales service to ensure the highest satisfaction of […]
