Feeding quantity control method of lab twin screw extruder
When using a lab twin-screw extruder, the current is too large, which can easily cause downtime. So it causes unnecessary waste.
One of the reasons is that the feed is too large.
The solution is:
Reduce the feeding amount of the feeder, or increase the screw speed of the small twin-screw extruder until the screw can be seen at the feeding port.
Since the 1930s, hot melt extrusion technology (HME) has been used in plastics and food industry. In the 1980s, HME was used […]
Hartek’s lab equipment are fully functional, easy to operate and easy to expand. It can be applied to formula research and development, […]
On the whole, the research on the theory of laboratory extruder is still in the initial stage. This is the so-called “more […]
Stainless steel laboratory pelletizer – high grade Generally used in medical treatment!
